'));

je30l inclined bed lathe【价格 批发 公司】-九游会体育线上平台

service hotline: 0512-3683 0232

contact number 13405111709

产品banner
your current location : home >> products >>
2022-03-31 11:06:25
second
detailed introduction:

turning diameter: ①320mm;

spindle speed: 5000rpm;

  x-axis and z-axis travel : 165mm & 300mm

the je series is a range of precision, durable and extremely cost-effective cnc machine tools, specially designed and built to take better advantage of the functions of the cnc system, such as rapid traverse speeds, high chip parameters, constant surface speed and more. machine tool parts such as ball screws, bearings, numerical control systems and transmission devices are selected from existing products in the world, and a special team composed of professional and skilled technologies completes the assembly of the machine tool under the guidance of experts.



cnc加工中心


main feature:

•the bed is made of 25-grain cast iron, which has been aged and has reinforcing ribs to ensure sufficient rigidity. the bed is designed for easy chip evacuation.

•the two axes use japan/germany/taiwan high-precision linear guides, and both x and z axes use high-precision ball screws with reasonable spacing, automatic lubrication, and high stability.

•two axes adopt 30m/min rapid traverse speed, power chuck or standard fixture system, high-efficiency and high-precision servo turret.

• hollow spindle, the spindle is assembled and tested in a controlled clean environment, with high precision bearings at the front and rear ends, and the bearings are lubricated with grease.

• hydraulic tailstock, programmable, the tailstock is supported by a v-rail and a flat rail.

•the system adopts japanese original fanuc frank, 10.4-inch led color screen, multi-language display.


4124829.jpg

cnc加工中心

三线加工中心

cnc加工中心


technical specifications:

itemje 30l
capacityswing over bedφ500
chuck sizeφ165mm (6")
maximum turning diameterφ320mm
maximum turning length with chuck230mm
bar capacityφ42mm
main spindlemax.spindle speed5000rpm
bore throngh spindleφ52.5mm
spindle nosea2-5
structure of spindlecartridge
spindle power cont5.5kw
spindle power intermediate 15 mins rating7.5kw
turretno.of stations8
tool cross section25x25-φ40
tool cross mechanismstp-80
axis x&zguide ways typelm
rapid traverse rate30m / min
feed rate0-10000mm
(stroke )x165mm
(stroke )z300mm
ball screw pith32x10
hydraulic(bar) max operating pressure bar30
tank capacity40liter
pump capacity14lpm
tailstocktaper in quillmt-4
revolving centre typeadd on
quill diameterφ60 mm
tailstock base travel135mm
quill travel75mm
coolant systemcoolant tank capacity90 liters
otherpower supply17kva
machine weight without packing2650kg
(lx wx h ) overall dimension2000x1684x2010


last:2022-03-31
next:none

tel: 0512-3683 0232

fax: 0512-5782 2801

mobile: 134 0511 1709

email: gwmce82@163.com

website: www.hohaichina.com

address: no. 29, daguanlu road, zhoushi town, kunshan city


kunshan hehai precision machinery co., ltd

scan

网站地图