'));

lt 30 inclined bed lathe【价格 批发 公司】-九游会体育线上平台

service hotline: 0512-3683 0232

contact number 13405111709

产品banner
your current location : home >> products >>
2022-03-31 10:13:36
second
detailed introduction:

the lt series is a series of cnc machine tools with high precision, high rigidity and high cost performance. it has the characteristics of rapid traverse speed, high chip parameters, constant surface speed, etc., and each axis has a safety clutch and can choose rear or side row according to the layout of the workshop. chip conveying device, the machine tool is assembled by a special team composed of professional and skilled technology under the guidance of expert technology.


•servo motors all use alpha motors


•the system adopts japanese original fanuc frank, 10.4-inch led color screen, multi-language display.


• two axes with 15m/min rapid traverse, powered chuck or standard gripper system.


•hollow spindle. the spindle is assembled and tested in a controlled clean environment. the front and rear ends are combined with high-precision cylindrical roller bearings and bidirectional angular contact thrust ball bearings to ensure high axial and radial stability of the spindle. with grease lubrication, the spindle motor adopts a high torque motor to ensure high chip power.


• hydraulic tailstock, programmable, the tailstock is supported by a v-rail and a flat rail.


technical specifications:


 itemlt 30
capacitybetween centre length1050/1500mm
maximum machining diaφ480mm
maximum turning length1050/1500mm(without chuck)
standard chuck size315/400mm
standard chucking cylindersyh-2091
cnc sysitemfanucoi-tf
main spindlespindle typecartridge
spindle nosea2-11
spindle bore105mm
standard bar capacity90mm
front bearing dia150mm
std spingle speed2000rpm
powerspindle motor power continuous18.5kw
spindle motor powerintermittentd 5min)22kw
full power range255-1530
spindle motor modelfanuc;alpha p-40
turretpragaticenter high100mm
number of tools max12
a/f of turret disc420mm
maximum boring bar dia40mm
od turning tool size25 x 25mm
 axis accuracypositioning for x、z axes as per iso± 0.01mm
repeatability for x、z axes as per iso± 0.008mm
x-axisaxes motor modelfanuc;alpha 22if
 x-axis guide wayshardenedstrip 
x-axis stroke255mm
x-axis rapid rate15m / min
x-ball screw dianndpitch32 x 10mm
x-motor torque22nm


technical specifications:

itemlt 30
z-axisaxes motor modelfanucjalpha 22if
z-asis guidewayshardenedstrip 
z-axis stroke1090/1540 mm
z-axis rapid rate15m / min
screw dianndpitch40 x 10mm
z-motor torque22nm
tailatocktailstock quill travel120mm
tailstock base travel795/1245mm
tailstock thrust (max)660@20bar
tailstock quill dia100mm
quill tapermt-5
tailstock centre typeadd on
misccoolant tank capacity250l
system pressure (max)30kg / cm²
hydraulic pump capacity25 l/min
power pack tank capacity70l
overall machine dimension4100 x1900 x1980mm
overall machine weight7000kg


last:none
next:lt 20 inclined bed lathe2022-03-31

tel: 0512-3683 0232

fax: 0512-5782 2801

mobile: 134 0511 1709

email: gwmce82@163.com

website: www.hohaichina.com

address: no. 29, daguanlu road, zhoushi town, kunshan city


kunshan hehai precision machinery co., ltd

scan

网站地图